Clarion DXZ766MP ユーザーズマニュアル

DXZ766MP

280-8371-00

3-3. Press and hold the [

] button for 2

seconds or longer to store the message in
memory and return to the display adjust
mode.
∗ Press and hold the [BND] button for 1

second or longer to delete the message.
Then press and hold the [

] button for 2

seconds or longer to return the message to
the default setting.

● Setting the method for title scroll

Set how to scroll in CD-TEXT, MP3/WMA TITLE.
∗ The factory default setting is “ON”.
2-1. Select “  AUTO SCRL”.

3-1. Turn the [ROTARY] knob to select “ON” or

“OFF”.

Scrolls automatically.

Scrolls just 1 time when the title was
changed or you press and hold the [T]
button for 1 second or longer.

● Setting the DIMMER control

You can set the dimmer control “ON” or “OFF”.
∗ The factory default setting is “ON”.
2-1. Select “  DIMMER”.

3-1. Turn the [ROTARY] knob to select on “ON”

or “OFF”.

1. Press the [ADJ] button to switch to the

adjustment selection display.

2. Press the [

å, ∂] lever upward or

downward to select the “item name”.

Each time the [

å, ∂] lever is pressed

up/down, the item display changes in the
following order:

↔ “ SUB-W” ↔

↔ “ AMP CANCEL” ↔

↔ “ SYSTEM CHECK”

3. Turn the [ROTARY] knob to select the

“desired setting item”.
∗∗∗∗∗ After completing settings, press the

[ADJ] button to return to the previous
mode.

● Anti-theft indicator

The red Anti-theft indicator is a function for
preventing theft. When the DCP is removed
from the unit, this indicator blinks.
∗ The factory default setting is “OFF”.
2-1. Select “  BLINK LED”.

3-1. Turn the [ROTARY] knob to select “ON” or

“OFF”.

● Setting the subwoofer

You can set the subwoofer on or off.
∗ The factory default setting is “ON”.
2-1. Select “  SUB-W”.

3-1. Turn the [ROTARY] knob to select “ON” or

“OFF”.

● Setting LOW PASS FILTER

∗ The factory default setting is “THROUGH”.
∗ If subwoofer function is set “ON”, “LOW PASS

FILTER” can be selected.

2-1. Select “  SUB-W LPF”.

3-1. Turn the [ROTARY] knob to select the setting.

Each time you turn the [ROTARY] knob, the
setting changes in the following order:

➜ 50 Hz ➜ 80 Hz ➜ 120 Hz

● Setting the external amplifier

∗ The factory default setting is “OFF”.
2-1. Select “  AMP CANCEL”.

3-1. Turn the [ROTARY] knob to select “ON” or

“OFF”.

• ON:
Use with connected AMP.

• OFF:
Use with inside AMP.

● Adjusting the auxiliary input sensitivity

Adjust the auxiliary sensitivity when the audio
from an external device is difficult to hear even
after adjusting the volume.
∗ The factory default setting is “MID”.
2-1. Select “  AUX SENS”.

3-1. Turn the [ROTARY] knob to select from

“LOW”, “MID” or “HIGH”.