Havis-Shields c-tm-expd ユーザーズマニュアル

 

C-TM-EXPD-INST-2-07 

Metric socket set 
Standard socket set  

Ratcheting wrench 

 

16 

¼-20 x 3/4” Hex Head Bolt 

GSM33001 

8 

¼” Flat Washer 

GSM31005 

8 

¼” Lock washer 

GSM31026 

8 ¼” 

Serrated 

nut 

GSM30023 

 

1 

Front transmission hump bracket 

C-B35 

1 

Rear transmission hump bracket 

C-B36 

1 

32” Trak Mount 

C-TM-32E 

! 

 Read all instructions before installing any Havis-Shields Equipment Corp products. 
 Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes! 
 Use hardware provided with install kit  
 For product support, visit the Install Instructions Section of our website at 

http://havis.com/Installation/Installation.html

 

1. 

Remove O.E.M. console if applicable.

 

2.  Remove inner front and rear seat-

mounting bolts near transmission hump. 
Loosen outer bolts only. 

3.  Place front and rear hump brackets legs 

in place under seat brackets. Do not bolt 
down. 

4.  Position cross piece and trak mount on 

top of legs.  

5.  Determine best position for application. 
6.  Attach trak to cross pieces using ¼” x 

¾” hex bolts and serrated nuts. 

7.  Attach trak and cross piece assembly to 

mounting legs using ¼” x ¾” bolts and 
washers. 

8.  Tighten all seat bolts 
9.  Attach console and/or accessories.