Havis-Shields c-as-mmp ユーザーズマニュアル

 

Standard and Metric Socket Set with 6” Extension 
Standard and Metric Wrench Set 
Torx driver #T15 and #T20 

 

12 

#8 X 3/8 Black Torx Screw  

CM86508 

 

4 

¼-20 X ½” Pem Stud  

GSM32220 

 

4 

¼” Lock Washer  

GSM31026 

 

4 

¼-20 Hex Nut  

GSM30005 

 
PARTS SUPPLIED 
 

1 

CM93569 – Monitor Platform Frame 

1 

CM93628 – Support Plate 

 

1 

Pair of Wire Panels 

1.  Turn console over and remove (2) #8 X 3/8” Black torx screws on bottom of console. 
2.  Place support plate on bottom of console as shown and replace (2) #8 X 3/8” Black torx screws. 
3.  Turn console back over and place (4) ¼-20 X ½” pem studs on bottom of support plate and insert 

(4) ¼” lock washers and (4) ¼” Hex nuts over studs on inside of console housing, then tighten. 

4.  Place monitor platform on front side of console and secure with (6) #8 X 3/8” Black torx screws. 
5.  Place wire panels on front sides of console and secure with (6) #8 X 3/8” Black torx screws. 
6.  Console is ready for mounting in car.