Havis-Shields c-tcb-27 ユーザーズマニュアル

 

C-TCB-27-INST-3-07 

3/16” Allen wrench 
3/8” Standard Socket Set 
3/8” Metric Socket Set 

3/8” Ratcheting Wrench 
Powered drill w/ 3/16” drill bit 
Open-end wrench set  

 

 

1 

Pole support assembly 

CM93071-27W 

1 

Telescoping pole assembly  

CM93072-3 

1 

Lag bolt ¼ x 1 

GSM33060 

 

! 

 Read all instructions before installing any Havis-Shields Equipment Corp products. 
 Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes! 
 Use hardware provided with install kit 

 
SUB ASSEMBLY: 

1.  Confirm receipt of all hardware and components. 
2.  Remove front inner and outer passenger seat bolts on 

vehicle. 

 

•  Position pole support assembly on top of 

passenger seat base mount and align holes in 
pole support assembly with holes in seat base. 

•  Loosely attached factory seat bolts that were 

removed during sub assembly. 

• 

Tighten down factory passenger seat bolts and 
5/16-18-nylock nut holding side support brace 
to pole support assembly. 

•  Mount optional C-3090, computer-mounting 

platform, to telescoping pole assembly using 
hardware and instructions provided with  
C-3090. 

 

 
 

Telescoping pole 

assembly 

Pole support 

assembly 

Location of  

passenger side factory 

seat base bolts