Vertex Standard FT-2000 ユーザーズマニュアル

Page 108

FT-2000 O

PERATING

 M

ANUAL

M

ENU

 M

ODE

The Menu system of the FT-2000 provides extensive customization capability, so you can set up your transceiver just the
way you want to operate it. The Menu items are grouped by general utilization category, and are numbered from “001 AGc
FST DLY

” to “147 tGEn EMRGNCY.”

U

SING

 

THE

 M

ENU

1. Press the [MENU] button momentarily, to engage the

Menu mode.
The Main (VFO-A) frequency display will show the
Menu Number and Menu Group name, while the Sub
(VFO-B) frequency display will show the Menu item;
the Multi-Display window shows the current setting of
the currently-selected Menu item.

2. Rotate the Main Tuning Dial knob to select the Menu

item you wish to work on.

3. Rotate the [SUB VFO-B] knob to change the current

setting of the selected Menu item.

4. When you have finished making your adjustments,

press and hold in the [MENU] button for two seconds
to save the new setting and exit to normal operation. If
you only momentarily press the [MENU] button, the
new settings will not be retained.

Main Tuning Dial Knob

[SUB VFO-B] Knob

[MENU] Button

Menu Mode Reset

You may reset all the Menu settings to their original factory defaults, if desired.

1. Turn the front panel [POWER] switch off.
2. Press and hold in the [MENU] button, and while holding it in, press the [POWER] switch to turn the transceiver

back on. Now release the [MENU] button.

Menu Number

Menu Group Name

Menu Item

Menu Setting