Vertex Standard FT-2000 ユーザーズマニュアル
Page 86
FT-2000 O
PERATING
M
ANUAL
TEXT Memory
The four channels of CW message memory (up to 50 characters total) may also be programmed using a text-entry tech-
nique. This technique is somewhat slower than when you send the message directly from your keyer paddle, but accuracy
of character spacing is ensured.
nique. This technique is somewhat slower than when you send the message directly from your keyer paddle, but accuracy
of character spacing is ensured.
Example 1: CQ CQ CQ DE W6DXC K} (20 characters)
And we will utilize another powerful feature of the CW Memory Keyer, the sequential Contest Number (“Countup”)
feature.
feature.
Example 2: 599 10 200 # K} (15 characters)
C
ONTEST
M
EMORY
K
EYER
S
TORING
A
M
ESSAGE
INTO
M
EMORY
1. Press the [MENU] button to enter the Menu mode.
2. Rotate the Main Tuning Dial knob to select the CW
2. Rotate the Main Tuning Dial knob to select the CW
Memory Register into which you wish to store the
message; for now, we are just selecting the message
entry technique (Keyer entry).
020 tEy CW MEM1
021 tEy CW MEM2
022 tEy CW MEM3
023 tEy CW MEM4
024 tEy CW MEM5
message; for now, we are just selecting the message
entry technique (Keyer entry).
020 tEy CW MEM1
021 tEy CW MEM2
022 tEy CW MEM3
023 tEy CW MEM4
024 tEy CW MEM5
3. Rotate the [SUB VFO-B] knob to set the selected
Memory Register to “tyP1.” If you want to text mes-
sage entry on all memories, set all five Menu items
(#020 ~ 024) to “tyP1.”
sage entry on all memories, set all five Menu items
(#020 ~ 024) to “tyP1.”
4. Press and hold in the [MENU] button to save the new
settings and exit.
T
EXT
M
ESSAGE
P
ROGRAMMING
1. Press the [CW] mode button to set the operating mode
to CW.
2. Be sure that Break-in is Off by pressing the [BK-IN]
button, if necessary.
3. Press the [F5(MEM)] button on the front panel.
4. Press the [F1(CH1)] ~ [F4(CH-4)] button to select
4. Press the [F1(CH1)] ~ [F4(CH-4)] button to select
the desired Message Memory Register into which you
wish to program the text.
wish to program the text.
5. Use the Main Tuning Dial knob to set the cursor posi-
tion and use the [SUB VFO-B] knob to choose the
letter/number to be programmed in each slot of the
memory. In the case of the second example above, the
“#” character designates the slot where the Contest
Number will appear.
letter/number to be programmed in each slot of the
memory. In the case of the second example above, the
“#” character designates the slot where the Contest
Number will appear.
6. When the message is complete, add the “}” character
at the end to signify the termination of the message.
7. Press and hold in the [F5(MEM)] button for 2 seconds
to exit, once all characters (including “}”) have been
programmed.
programmed.
A
DVICE
:
Deleting Previously-stored Characters
Use the Main Tuning Dial knob to select the last correct
letter in the message. Now rotate the [SUB VFO-B] knob
to select the “}” character; everything after the “}” charac-
ter will be deleted.
Use the Main Tuning Dial knob to select the last correct
letter in the message. Now rotate the [SUB VFO-B] knob
to select the “}” character; everything after the “}” charac-
ter will be deleted.
Main Tuning Dial Knob
[SUB VFO-B] Knob
[MENU] Button
[BK-IN] Button
Main Tuning Dial Knob
[SUB VFO-B] Knob
[F1(CH-1)] ~ [F4(CH-4)] Button
[F5(MEM)] Button
CW Memory Register Number
Current Cursor Position
Message
Cursor
CW C
ONVENIENCE
F
EATURES