Vertex Standard FT-2000 ユーザーズマニュアル
Page 89
FT-2000 O
PERATING
M
ANUAL
CW C
ONVENIENCE
F
EATURES
C
ONTEST
M
EMORY
K
EYER (U
SING
THE
OPTIONAL
FH-2 R
EMOTE
C
ONTROL
K
EYPAD
)
5. Press the [1] ~ [5] key on the FH-2 to begin the memory
storage process.
6. Send the desired message using your keyer paddle.
7. Press the [MEM] key on the FH-2 once more at the
7. Press the [MEM] key on the FH-2 once more at the
end of your message. Up to 50 characters may be stored
among the five memories.
among the five memories.
LOCK
OFF
ON
LOCK
OFF
ON
N
OTE
:
You must exercise care in sending to ensure that the spaces
between letters and words are accurately done; if your tim-
ing is off, the spacing may not come out right in the stored
message.
between letters and words are accurately done; if your tim-
ing is off, the spacing may not come out right in the stored
message.
For ease in setting up the keyer memories, we recommend
you set Menu item “052 A1A F-TYPE” and/or “054 A1A
R-TYPE
you set Menu item “052 A1A F-TYPE” and/or “054 A1A
R-TYPE
” to “ACS” (Automatic Character Spacing) while
you are programming the keyer memories.
LOCK
OFF
ON
C
HECKING
THE
CW M
EMORY
C
ONTENTS
1. Be sure that Break-in is still turned Off.
2. Press the [MONI] button to enable the CW monitor.
3. Press the FH-2’s [1] ~ [5] key to check your work.
2. Press the [MONI] button to enable the CW monitor.
3. Press the FH-2’s [1] ~ [5] key to check your work.
You will hear the results in the sidetone, but no RF
energy will be transmitted.
energy will be transmitted.
N
OTE
:
You may adjust the monitor level using the [MONI] knob.
O
N
-T
HE
-A
IR
CW M
ESSAGE
P
LAYBACK
1. Press the [BK-IN] button to enable transmission. Ei-
ther Full- or Semi-break-in will be engaged, depend-
ing on the setting of Menu item “058 A1A BK-IN.”
ing on the setting of Menu item “058 A1A BK-IN.”
2. Press the FH-2’s [1] ~ [5] key to transmit the pro-
grammed message.
M
ESSAGE
M
EMORY
P
ROGRAMMING
(U
SING
YOUR
P
ADDLE
)
1. Set the operating mode to CW.
2. Set the [BK-IN] button to Off.
3. Turn the internal Electronic Keyer On by pressing the
2. Set the [BK-IN] button to Off.
3. Turn the internal Electronic Keyer On by pressing the
[KEYER] button, if necessary.
4. Press the FH-2’s [MEM] key.
LOCK
OFF
ON
N
OTE
:
If you subsequently decide to use the “Text Memory” tech-
nique for memory storage, please note that the contents of
a message stored using keyer paddle input will not be trans-
ferred over when you select “Text Memory technique” on
a particular memory register (the Menu Mode Setting is
set to “tyP1”).
nique for memory storage, please note that the contents of
a message stored using keyer paddle input will not be trans-
ferred over when you select “Text Memory technique” on
a particular memory register (the Menu Mode Setting is
set to “tyP1”).
LOCK
OFF
ON