Vertex Standard FT-2000 ユーザーズマニュアル
Page 97
FT-2000 O
PERATING
M
ANUAL
Checking a Memory Channel’s Status
Before programming a channel into memory, you can check the current contents of that channel without the danger of over-
writing the channel accidentally.
writing the channel accidentally.
M
EMORY
O
PERATION
S
TANDARD
M
EMORY
O
PERATION
1. Press the [A
M] button momentarily.
The data stored in the currently-selected memory chan-
nel will be displayed in the Sub band (VFO-B) fre-
quency field. However, since you are only checking
the contents of the memory channel, your radio will
not have moved to the memory channel’s frequency.
nel will be displayed in the Sub band (VFO-B) fre-
quency field. However, since you are only checking
the contents of the memory channel, your radio will
not have moved to the memory channel’s frequency.
2. Rotate the [SUB VFO-B] knob to select a different
memory channel. To exit from the Memory Check
mode, press the [A
mode, press the [A
M] button momentarily once
more.
A
DVICE
:
While the Memory Check function is engaged, the
memory channel number will blink in the multi-panel
window.
window.
While operating in the VFO mode, using Memory
Check, you may store the current contents of the Main
(VFO-A) register into the selected memory by press-
ing and holding in the [A
(VFO-A) register into the selected memory by press-
ing and holding in the [A
M] button for two seconds
(until the double beep). Conversely, if you wish to write
the contents of the current memory into the Main (VFO-
A) register, press and hold in the [M
the contents of the current memory into the Main (VFO-
A) register, press and hold in the [M
A] button for
two seconds.
Erasing Memory Channel Data
1. Press the [A
M] button.
The data stored in the currently-selected memory chan-
nel will be displayed in the Sub (VFO-B) band fre-
quency field.
nel will be displayed in the Sub (VFO-B) band fre-
quency field.
2. Rotate the [SUB VFO-B] knob to select the memory
channel that you would like to erase.
3. Press the [LOCK] button to erase the contents of the
selected memory channel.
A
DVICE
:
After erasure, only the memory channel number will
remain; the frequency data will disappear from the dis-
play.
play.
If you make a mistake and wish to restore the memory’s
contents, just repeat steps (1) through (3) above.
[A
M] Button
[SUB VFO-B] Knob
[LOCK] Button
[SUB VFO-B] Knob
[A
M] Button