Havis-Shields c-vs-800-cv ユーザーズマニュアル

4 

 

TOOLS REQUIRED: 
Ratcheting wrench 
Standard/Metric socket set 
Screwdriver set 
 

Tin snips (if necessary) 
Powered Drill w/ 5/16” drill bit 
 

2 

#10 x ¾” Phillips sheet metal screws 

GSM33195 

1 Torx 

Screw 

Kit      C-HK-1 

 

Always! 

 Disconnect the vehicles’ battery. Removing seat bolts on 

some vehicles may give the vehicles computer a false 
reading resulting in warning lights. This requires the 
vehicles’ computer to be reset. 

 Read all instructions before installing any Havis-Shields 

Equipment Corp products. 

 Check for obstructions (Wire, brake lines, fuel tank, etc.) 

before drilling any holes! 

 Use hardware provided with install kit. 
 For product support, visit the Install Instructions Section 

of our website at 

http://havis.com/Installation/Installation.html

, email 

technicalsupport@havis.com

 or call 1-800-524-9900.  

 

Ford Crown Victoria dashboard 

Remove ashtray and power point 

housing from dash 

A flat head screwdriver is needed to 

release the tray from the slide tracks