Rowenta de480 ユーザーズマニュアル

To avoid damage to clothes from
dust or dirt that may collect in the
iron, we recommend that for the
first use or after the iron has been
stored for some time that you first

iron an old cloth, testing both the
steam and burst of steam feature.

Set the temperature control dial
according to the type of fabric you
are ironing. Check the fabric's label
for appropriate setting.

●

synthetics (low temperature)

●●

silk, wool (medium temperature)

●●●

cotton, linen (high temperature)

To avoid an automatic switch off while the iron is heating
up, always keep the iron on its heel. Start at low temperature
and graduate to high temperature. For delicate fabrics we
recommend carrying out a test on an unobstrusive part of
the garment (inner seam).

M

Slowly pull cord out of reel by plug. Pull cord until it is
fully extended being sure not to yank cord.

M

Plug into outlet. The pilot light will turn on to indicate the
iron is heating. When the pilot light goes out the iron is
ready to use.

Set the variable steam control to
required steam volume. Steam can
only be produced when the ther-
mostat is in the red cotton/linen
zone. Allow iron to heat up (light
goes out) before activating the
variable steam control. Reduce or
set variable steam to min. when
ironing at low temperatures to
avoid water leakage or spitting.

Steam is produced as soon as the iron is held horizontally.

Steam generation can be interrupted:

M

by standing the iron on its heel or

M

by sliding the variable steam control fully to the left
(min setting)