Hanna Instruments c 114 ユーザーズマニュアル

35

34

Before using this product, make sure that it is entirely suitable for the environment in which it is used.

Operation of this instrument in residential areas could cause unacceptable interference to radio and TV
equipment, requiring the operator to take all necessary steps to correct the interference.

Any variation introduced by the user to the supplied equipment, may degrade the instrument's EMC
performance.

To avoid electrical shocks, do not use this instrument when voltage at the measurement surface
exceeds 24VAC or 60VDC.

To avoid damage or burns, do not perform any measurement in microwave ovens.

Hanna Instruments meters are guaranteed
for two years against defects in workman-
ship and materials when used for their in-
tended purpose and maintained according to
instructions.

This warranty is limited to repair or replace-
ment free of charge. Damages due to acci-
dents, misuse, tampering or lack of prescribed
maintenance are not covered.

If service is required, contact the dealer from
whom the instrument was purchased. If under
warranty, report the model number, date of
purchase, serial number and the nature of the
failure. First obtain a Returned Goods Autho-
rization number from the Customer Service
department and then return the instrument
indicating the Authorization # with shipment
costs prepaid.

If the repair is not covered by the warranty,
you will be notified of the charges.

When shipping any instrument, make sure it
is properly packaged for complete protection.

To validate your warranty, fill out and return
the enclosed warranty card within 14 days
from the date of purchase.

All rights are reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner,
Hanna Instruments Inc., Woonsocket, Rhode
Island, 02895, Tel. (401) 765-7500 –
Fax (041) 765-7575.

Hanna Instruments reserves the right to modify
the design, construction and appearance of
its products without advance notice.