OKI 4510 ユーザーズマニュアル
13
Fax switch
The built-in fax switch enables a single telephone connection to
be used to send and receive faxes and use extra devices. There
are two operating modes. Your machine is preset to AUTO
mode.
be used to send and receive faxes and use extra devices. There
are two operating modes. Your machine is preset to AUTO
mode.
1 The desired operating mode can be selected using AUTO/
MANU. Press the button until the desired mode appears.
MANU mode
If you receive a fax call you have to press START/COPY to
start fax reception. Automatic fax reception is turned off.
start fax reception. Automatic fax reception is turned off.
AUTO mode
In AUTO mode your machine will ring up to nine times de-
pending on the setting. Faxes are received automatically.
pending on the setting. Faxes are received automatically.
1 To set the number of rings press MENU and 222.
The display shows AUTO RING COUNT.
2 Press START/COPY and enter the desired number of
rings.
3 Press START/COPY and then STOP twice.
v
v
v
v
v
If the volume level is set to zero, no ringing tone
will be heard but faxes will still be automatically
received.
will be heard but faxes will still be automatically
received.
Fax reception from
a different phone
a different phone
If you pick up another phone and hear a fax call (you will hear
a high-pitched tone or nothing at all) you can start the fax
machine using a code. If this does not work, press START/
COPY on the fax machine.
a high-pitched tone or nothing at all) you can start the fax
machine using a code. If this does not work, press START/
COPY on the fax machine.
1 To define the code press MENU and 224. The dis-
play shows REMOTE FAX START.
2 Press START/COPY. Use u to select ON or OFF.
3 Press START/COPY and enter the last digit of the code.
3 Press START/COPY and enter the last digit of the code.
This always starts with *5.
4 Press START/COPY and then STOP twice.