VTech DS4122-3 ユーザーズマニュアル

NOTE: Use only the power adapters supplied with 

your VTech telephone or equivalent.

For complete feature instructions, please refer to your 

user’s manual.

Plug  the  connector  into  the  power  jack  at  the 

bottom of the telephone base and chargers then 

plug the power adapter into an electrical outlet not 

controlled by a wall switch.
Plug one end of the telephone line cord into the 

telephone line jack at the bottom of the telephone 

base. Then plug the other end of the cord into the 

modular wall telephone outlet.

1.

2.

If the battery compartment cover is on the handset, 

press  the  indentation  and  slide  the  cover  to 

remove.
Align the two holes of the battery plug with the socket 

pins in the handset battery compartment, matching 

the red and black wires to the color-coded label, then 

snap the plug securely into place.
Place the battery in the compartment with the wires 

in the upper left corner.
Position the battery compartment cover and slide it 

up until it clicks into place.
Place the handset in the telephone base or charger to 

charge. The 

CHARGE light on the telephone base or 

charger will be on when the battery is charging.

For  optimal  performance,  we  recommend  that  you 

charge the handset for 16 hours. The new battery may 

have enough charge for some calls.

1.

2.

3.

4.

5.

•   Press 

/

FLA�H or 

/

�PEAKER to ensure there 

is a dial tone, then dial the telephone number. 

 

 
  �OR�

For predialing: 

Dial  the  number  (press 

MUTE�REMOVE  or       

OFF�CLEAR  to  backspace,  or  press  and  hold 

RE�IAL�PAU�E to insert a pause).
Press 

/

FLA�H or 

/

�PEAKER if you want to 

use the speakerphone function.

•  Press 

/

FLA�H or 

/

�PEAKER or any dialing 

keys (

0�9, #, *).

•  Press 

OFF�CLEAR  or  put  the  handset  in  the 

telephone base or charger.

1.

2.

Press 

CLOCK  and  the  system  will  announce 

the  current  clock  setting.  The  system  will  then 

announce 

Press 

CLOCK again and the system will announce 

the year.
Press 

��KIP  or  /REPEAT  until  the  system 

announces the correct year, then press 

CLOCK. 

The system will announce the hour.
Press 

��KIP  or  /REPEAT,  until  the  system 

announces the correct hour, then press 

CLOCK. 

The system will announce the minute.
Press 

��KIP  or  /REPEAT  until  the  system 

announces  the  correct  minutes,  then  press 

CLOCK. The system will announce the day.
Press 

��KIP  or  /REPEAT  until  the  system 

announces the correct day, then press 

CLOCK. 

The system will announce the new clock setting 

and return to idle mode.

1.

2.

3.

4.

5.

6.

The answering system must be turned on to function. 

If the answering system is turned off, the telephone 

base light will be off.
To turn on/off the answering system:
•  Press 

AN� ON�OFF to turn on the answering system 

and press 

AN� ON�OFF again to turn it off.

The telephone is preset with a greeting that answers 

calls with 

You can use this preset announcement, or replace it 

with your own. While in the 

ANNC menu, press ANNC 

again to exit at anytime.
To replace the default announcement:

Press 

ANNC while in idle mode and the system will 

announce 

RECORD.”
Press 

RECOR� and the system announces “Record 

After the tone, speak towards the microphone at the 

bottom front of the telephone base from about nine 

inches away.
Press 

�PLAY��TOP when finished.

The  answering  system  will  automatically  playback 

the newly recorded announcement and there will be 

a confirmation tone. Press 

�PLAY��TOP to stop 

the playback at anytime.
Press 

�PLAY��TOP again to replay the recorded 

announcement. Press 

RECOR� to record again if 

you  do  not  like  the  announcement  just  recorded. 

Press 

ANNC to exit and return to idle mode.

1.

2.

3.

4.
5.

6.

IMPORTANT!
If your product is not working properly:

Refer to the 

Troubleshooting section of your 

user’s manual.
Visit our website at www.vtechphones.com, or in 

Canada, www.vtechcanada.com.
Call our customer service at 1 (800) 595-9511 or              

1 (800) 267 7377 in Canada.

•

•

•

Your telephone comes with additional colorful handset 

rings.  Change  it  to  suit  your  mood  or  match  your 

room decor.
To remove the handset ring:

Insert your thumbnail into the slot underneath the 

MENU��ELECT button.
Lift up the colorful handset ring.

To install a new handset ring:

Align  the  desired  handset  ring  against  the

MENU��ELECT button.
Press the colorful handset ring downward until it 

clicks into place.

1.

2.

1.

2.

96-006503-040-100   

1

2

3

4