Intel 05-2065-003 ユーザーズマニュアル
IP Media Server (Global Call) Demo Guide — August 2005
17
Preparing to Run the Demo
Sample Configuration File
################################################################################################
# IP Protocol :
# The IP Protocol used for opening the IP Line devices, values: H323, SIP, both
#
# DTMFmode
# possible options:
# OutOfBand, inband, rfc2833
#
# Capability posiblities:
# g711Alaw
# g711Mulaw
# gsm
# gsmEFR
# g723_5_3k
# g723_6_3k
# g729a
# g729ab
# t38UDPFax
#
# Note: if you want to run the demo with coder g729 use:
# g729a for running with VAD disable
# and 729ab for running with VAD enable
#
# Caution:
# If capability is g711Alaw /Mulaw ==> FramesPerPkt = 10,20,30.
# G711 frame per packet defines the packet size in
# milliseconds
# If capability is g723_5_3k / 6_3k ==> FramesPerPkt = 1, 2, 3 .
# FrameSize isn't needed, default= 30ms.
# If capability is gsm ==> FramesPerPkt = 1, 2, 3 .
# FrameSize isn't needed, default= 20ms.
# If capability is gsmEFR ==> FramesPerPkt = 1, 2, 3 .
# FrameSize isn't needed, default= 20ms.
# If capability is g729a ==> FramesPerPkt = 3, 4 .
# FrameSize isn't needed, default= 10ms.
# VAD disable, the VAD parameter is ignored
# If capability is g729ab ==>FramesPerPkt = 3, 4 .
# FrameSize isn't needed, default= 10ms.
# VAD enable, the VAD parameter is ignored
#
################################################################################################
# IP Protocol :
# The IP Protocol used for opening the IP Line devices, values: H323, SIP, both
#
# DTMFmode
# possible options:
# OutOfBand, inband, rfc2833
#
# Capability posiblities:
# g711Alaw
# g711Mulaw
# gsm
# gsmEFR
# g723_5_3k
# g723_6_3k
# g729a
# g729ab
# t38UDPFax
#
# Note: if you want to run the demo with coder g729 use:
# g729a for running with VAD disable
# and 729ab for running with VAD enable
#
# Caution:
# If capability is g711Alaw /Mulaw ==> FramesPerPkt = 10,20,30.
# G711 frame per packet defines the packet size in
# milliseconds
# If capability is g723_5_3k / 6_3k ==> FramesPerPkt = 1, 2, 3 .
# FrameSize isn't needed, default= 30ms.
# If capability is gsm ==> FramesPerPkt = 1, 2, 3 .
# FrameSize isn't needed, default= 20ms.
# If capability is gsmEFR ==> FramesPerPkt = 1, 2, 3 .
# FrameSize isn't needed, default= 20ms.
# If capability is g729a ==> FramesPerPkt = 3, 4 .
# FrameSize isn't needed, default= 10ms.
# VAD disable, the VAD parameter is ignored
# If capability is g729ab ==>FramesPerPkt = 3, 4 .
# FrameSize isn't needed, default= 10ms.
# VAD enable, the VAD parameter is ignored
#
################################################################################################
ipProtocolName = H323
DTMFmode = inBand
Channel = 1-120
{
Capability
{
# TxType = g711Alaw
# TxFramesPerPkt = 30
DTMFmode = inBand
Channel = 1-120
{
Capability
{
# TxType = g711Alaw
# TxFramesPerPkt = 30
Table 2. Quality of Service Parameter Defaults for IPT Series Boards
QoS Type
Fault
Threshold
1
Time
Interval (ms)
Debounce
On (ms)
Debounce
Off (ms)
% Success
Threshold
% Fail
Threshold
Jitter
30 (ms)
0 (n/a)
0 (n/a)
0 (n/a)
0 (n/a)
0 (n/a)
Lost Packets
100 (%)
0 (n/a)
0 (n/a)
0 (n/a)
0 (n/a)
0 (n/a)
Notes:
1. Units for Fault Threshold are different for different QoS Types. See unit indications in table cells.
1. Units for Fault Threshold are different for different QoS Types. See unit indications in table cells.