Honeywell T7300D ユーザーズマニュアル
T7200D,E, T7300D,E,F AND Q7300 SERIES 2000 PROGRAMMABLE COMMERCIAL THERMOSTATS AND SUBBASES
63-4355—4
14
Fig. 15. LCD display of all segments.
Fig. 16. Test number display.
Table 8. Tests Available in Installer System Test.
NOTE:
If a duct temperature sensor is installed
(T7300F only), duct temperature is also displayed.
(T7300F only), duct temperature is also displayed.
Refer to Table 9 and Thermostat Information section for
directions and results of the specific system tests.
directions and results of the specific system tests.
NOTE:
Press Run Program to exit the system test. The
system test times out after four minutes without any
key presses.
system test times out after four minutes without any
key presses.
Thermostat Information
1.
Press Heat/Cool Settings to access thermostat
information.
information.
2.
Press increase
▲
to display the production date code.
The first two large digits are the month and the third digit
is the last digit of the year.
(Example: 036 = March 1996).
is the last digit of the year.
(Example: 036 = March 1996).
3.
Press increase
▲
again to display the software
identification code. (Example: 02 = software ID code 2).
4.
Press increase
▲
again to display the software revision
number. (Example: 001 = revision number 1).
5.
Press increase
▲
again to display the EEPROM
identification code. (Example: 314 = EEPROM ID 313).
6.
Press increase
▲
again to display the subbase
identification code.
(Example: HP = heat pump subbases).
(Example: HP = heat pump subbases).
7.
Press Run Program to exit the self-test. The self-test
times out after four minutes without any key presses.
times out after four minutes without any key presses.
Test
Number
System Test Description
10 to 19 Heating equipment can be turned on and off.
20 to 29 Emergency heat equipment can be turned on and
off (Q7300C,D,H only).
30 to 39 Cooling equipment can be turned on and off.
40 to 49 Fan equipment can be turned on and off.
60 0 to
60 19
60 19
Keyboard keys test.
70 to 79 Thermostat information including date code and
software versions are displayed.
Heat
Auto
System
Fan
Off
Auto
Un
Mon
Wait
Lo
In
Room
Remote
%Humid
Auto
Sav
AM
PM
Comm
Cool
Duct
Only
On
Recovery
Hi
Med
Cool
TueWedThuFriSatSun
Occupied 12 Override
M4916
Aux Ht
Em Ht
Set Program
Set Day/Time
Start Time
Temporary Setting Enrg
Em Heat
M10257A
TEST NUMBER
M4934
M4931
M4932A
M10229
M4933A
M10290