VTech dect 6.0 ds6221-3 ユーザーズマニュアル

Install the battery as shown below. After 

installing the battery, you might be able to make 

and receive short calls. For best performance, 

charge the handset battery for at least 16 hours 

before use.

Press 

 or  . You hear a 

dial tone.
Dial the number.

Dial the number.
Press 

or 

.

Press 

, 

 or any of the 

dialing keys (

-

, 

 

).

Press 

 or put the handset in the 

telephone base or charger.

1.

2.

1.
2.

Install the telephone base and charger(s) as 

shown below.

Telephone base

Electrical outlet 

not controlled by 

a wall switch

Charger adapter

Charger

1

2

3

Plug the battery 

connector securely 

into the socket inside 

the handset battery 

compartment, matching 

the color-coded label.

Place the battery with 

the label 

UP facing up and the 

wires inside the battery 

compartment. 

Align the cover flat 

against the battery 

compartment, then slide 

it towards the center of 

the handset until it clicks 

into place.

Charge the handset by 

placing it in the telephone 

base or charger. The 

CHARGE light is on when 

the handset charges.

If the battery 

compartment cover is on 

the handset, press the 

indentation and slide the 

cover to remove.

5

The answering system must be turned on to 

answer and record messages.
When the answering system is turned on, the 

 light on the telephone base will be 

on and 

ANS ON 

will display on the handset.

Press 

ANS ON/OFF to turn 

the answering system on or 

off. If the answering system 

is turned on, it announces, 

“Calls will be answered.”  If 

the answering system is 

turned off, it announces, 

“Calls will not be answered.” 

Press 

 to show the menu 

when the handset is not in use.
Press 

/SELECT to select    

>ANS. SYSTEM.
Press   or   to select >

ANS SYS SETUP, 

then press 

/SELECT.

Press 

/SELECT to select    

>ANSWER ON/OFF.
Press   or   to choose 

ON or OFF, then 

press 

/SELECT.

•

1.

2.

3.

4.

5.

Telephone 

base power 

adapter 

Electrical outlet not controlled 

by a wall switch

Use only the power adapter(s)  

 

  and battery(ies) supplied with your  

 

  VTech telephone.

For complete feature instructions, please  

  refer to your user’s manual.

•

•

4

Telephone 

line cord

If you have DSL 

high speed 

Internet service, 

a DSL filter (not 

included) is 

required.

Telephone 

wall jack

CHARGE light