Honeywell av8or ユーザーズマニュアル

AV8OR User’s Guide                         Aviation Mode Operation  
Messages Function 
 

Pub. No D200803000008         Page 3-70     Revision July 2008. 

© Honeywell International Inc. Do not copy without express permission of 

 
The checklists can only be created, edited and deleted on a PC and 
then transferred to the SD card. In order to create a valid checklist 
and allow the software to find the checklists the following rules must 
be followed: 

•  The Checklists must be stored in the \GoFly\data\user\Notepads 

directory on the SD card. 

•  Checklists must be text files. 

•  The filename must have the .txt extension. (Example is 

“emergency.txt”) 

•  The file size must be less than 16,384 bytes. 

•  A text file with the name “route.txt” is an invalid notepad filename 

and is not recognized.  The filename “route.txt” is used to load 
flight plan and WPT data. 

•  The name assigned to the file will be the name displayed on the 

checklist page.  Therefore, the name should be representative of 
the function the checklist is performing.  An example is “Engine 
Start”. 

 

•  Checklists must be created using the following rules: 

•  Each checklist item should start with [] square brackets to create 

an easy to read checklist. 

•  The [] brackets are interpreted as a check box indication and can 

appear anywhere. 

•  Each checklist item must end with a carriage return. 

•  The number of characters on each line should be limited to 50 or 

fewer characters. If more than 50 characters are on a line, then 
the text will wrap to the next line. 

•  Everything is displayed as typed. 
 
An example checklist is shown below: 
 

[] Entry 1 
[] Entry 2 
[] Entry 3 
[] Entry 4 
[] Entry 5 
[] Entry 6