Uniden gns8436 ユーザーズマニュアル

1.  Make sure the glass area you wish to attach the Glass Mount Bracket to is 

clean.

2.  Double check that the final location does not impede the safe operation 

of the vehicle.

3.  Loosen the turn screws. Hold the Glass Mount Bracket up to the intended 

position and adjust the angle between the suction mount and bracket 
arm. Tighten the turn screws.  With the release lever loose firmly press
the suction cup against the windscreen, push the release lever to secure 
suction. (fig 1).

1. Insert DC plug of Cigarette Lighter Lead into the DC Power 

socket of your GNS8361/8366 and connect the other end to the 
+12V - 24V cigarette lighter socket.

3

Secure unit to bracket. (fig 2).
1. Flip up the antenna located at the rear of the main unit.
2. Sit the main unit on the two locating pegs at the bottom of the 

mounting bracket.

3. Squeeze together the two grey release buttons on the mounting 

bracket and rock the main unit back onto the bracket.

4. Release the two grey buttons and check the unit is secure.

Fig 2: Secure unit to bracket

Fig 1: Line up glass mount to 
windscreen