Radio Shack 2902 ユーザーズマニュアル

4

3. Plug a third telephone line cord into the answering machine’s

phone jack and the phone’s modular jack.

4. Set your answering machine to answer after two or more rings.

This gives the system time to record the call information that the
phone company sends between the first and second rings.

You can set the system flat on a desk, shelf, or table or use the sup-
plied mounting bracket to set the system at an angle. You can also
use the bracket to mount the system to a wall.

1. Align the keyhole slots on the bottom of the system with the

hooks on the mounting bracket.

2. Gently push the bracket up into the system to secure it.

To remove the bracket from the system, press up from the bottom of
the system until the bracket snaps off.

To mount the system on the wall, you need two screws (not sup-
plied) with heads larger than the keyhole slots on the back of the
mounting bracket.

1. Drill two holes 1

7

/

16

 inches (37 mm) apart

at the mounting location. Thread a screw
into each hole, letting the heads extend
about 

1

/

8

 inch (3mm) from the mounting

surface.

2. Attach the mounting bracket to the system

(see “Attaching the Mounting Bracket”).

3. Connect the system as described in “Connecting the System”.

4. Align the keyhole slots on the mounting bracket with the screws

and slide the system down until it is secure.

To lighten or darken the display, hold down 

 and 

:

:

:

:

until 

 

 appears. Then repeatedly press 

;

;

;

;

 to select the desired contrast setting. Press the 

 

:#

:#

:#

:#

key to

set the contrast.

Your system is programmed to display messages in English, but you
can change it to display in French or Spanish. 

1. Hold down 

 

:#

:#

:#

:#

and 

;

;

;

;

 for about 3 seconds until the cur-

rent language (

, 

 for French, or

 for Spanish) appears.

2. Repeatedly press 

;

;

;

;

 until the desired language

appears.

3. Press 

 

:

:

:

:

 to set the new language.

Note: If a button is not pressed within 10 seconds, the time appears.

The time and date are set with your first incoming Caller ID and up-
dated with every new call. To toggle between 12- or 24-hour time
formats, repeatedly press 

 while the system is not in use.

Caller ID is a service provided by your telephone company. When
you subscribe to this service, the telephone company sends the call-
er’s telephone number (and name, if available) and the call’s date
and time between the first and second rings. The system receives
and displays this information for each call and updates the display
with the current date and time. Your system saves up to 79 call
records, then replaces the oldest call record with each new one. Re-
peat calls are stored separately, instead of all on the same record.

During an incoming call, the red new call indicator flashes quickly
while the phone is ringing, then the number of new and total calls ap-
pear. The indicator flashes slowly until all calls are reviewed. 

Each time you receive a call, the system saves a call record in mem-
ory that you can see while you are on the phone, or review later.
Each call record includes the time and date of the call, the call num-
ber (order in which the call is received), the caller’s telephone num-
ber, and the caller’s name (if available).

To scroll through the call records, repeatedly press (or hold down)
either 

 key.

• If no call information is stored, 

 

 appears when you

press either 

 key.

• If you do not press a button within about 10 seconds, the sys-

tem automatically returns to the time and date display.

• After you review all calls, 

 

 

 appears. Press

either 

 key to view again.

1

8

1

8

7

16

Appears with a number if you have 
received a call from the same phone 
number more than once (up to 9 times).

 

 

 

Appears along with 

 (long distance 

call) if your phone company sends infor-
mation indicating that the incoming call 
is long distance.

 

 

 

 

Appears when the incoming call is from 
an area that does not send Caller ID 
name information.

 

 

 

 

Appears when the incoming call is from 
an area that does not send Caller ID 
number information.

 

 

 

 

Appears when the incoming call is from 
an area that does not send any Caller ID 
information.

 

 

 

Appears when the caller has blocked the 
Caller ID name information from being 
sent.

 

 

 

 

Appears when the caller has blocked the 
Caller ID number information from being 
sent.