Uniden UBCT9 ユーザーズマニュアル

Before the scanner begins Private Bank scanning, you must program a frequency into at
least one channel. Visit our website (www.uniden.com.au, www.uniden.co.nz) for
information on known frequencies. Frequencies for Australia can be found on the 
Australia Scanner Frequencies CD included with the UBCT.

You will need to program each frequency into the scanner’s channels in order to hear these
frequencies.
1.   Press HOLD/RESUME and enter the channel
 

number where you want to store a frequency by

 

using the keypad, then press HOLD/RESUME. 

or  Change the channel by using the   or    key.

2.   Enter the frequency you want to store by using the
 

keypad and  

  (decimal key).

3.   Press E to store the frequency into the channel.

4.   If you want to program another frequencies into the
 

channel, select another channel by using the or

 

key.

Note:  •  To clear a mistake while entering the frequency, press  

  (decimal key)

 

  repeatedly until the display is cleared.

 

•  If you enter a invalid frequency, an error tone will sound and “Error” appears  

 

 

  on the display. To clear the Error message immediately, press   

 (decimal key).

 

•  Even if you don’t enter full numbers as a frequency number, the scanner will

 

  automatically select the nearest valid frequency.

To delete a stored frequency:
 

a.  Select a channel.

 

b.  Press 0.

 

c.  Then press E.

Note: Channels with no frequencies are automatically locked out.

SCAN

SCAN

SCAN

UBCT9 OM   21

12/11/07   3:53:39 PM