Uniden UBCT9 ユーザーズマニュアル

You can quickly store any frequency you find during Search.

1.   During Search, press HOLD/RESUME. If you want
 

to change the frequency, use the    or   key to

 

move up or down 1 frequency step. Then press E. Or

 

when the scanner stops on the frequency you want

 

to store, press E.

2.   Select a bank you want to store by using the keypad.
 

The smallest empty channel number and the

 

frequency alternately appear on the display. If

 

necessary, you can also change the channel by

 

using the keypad, the    or   key.

3.   Press E.

Note:  •  If the frequency you want to store exists already in a bank, you will hear an error
 

  tone and other channel appears on the display. (See “Duplicate Frequency Alert”

 

  on page 22.)

 

•  After storing the frequency, it moves to the Search Hold mode.

 

•  If there is no free channel, the frequency you want to store will automatically be

 

  stored in the first channel in the selected bank.

4.   Press to resume searching.

To help prevent missing a reply on a specific channel or frequency, you can program a two 
second delay into any channel, frequency, service band or band search. When scan or
search stops on a channel or frequency, there is a two-second pause before the scanning
cycle resumes.

To activate the Delay feature (in either Scan mode or Search mode):
1.   For State Scan mode or Private Scan mode, when in Hold mode, select the desired
 

frequency or channel and then press DELAY. Or when the scanner stops on an active

 

frequency or channel, quickly press DELAY before it continues scanning again.

––– OR –––

1.   For Search mode, while searching press DELAY.

2.   “DLY ” will appear on the display.

UBCT9 OM   28

12/11/07   3:53:45 PM