ZyXEL Communications zyair g-300 ユーザーズマニュアル

 

 

ZyAIR G-300 User’s Guide  

Using the ZyAIR Utility 

 

2-11 

 SSID  Enter the SSID (Service Set IDentifier) of the AP or the peer ad-hoc computer to which 

you want to associate.  To associate to an ad-hoc network, you must enter the same 
SSID as the peer ad-hoc computer.  
Enter “any” to associate to or roam between any infrastructure wireless networks.  

Advanced  Click Advanced to display the Advanced Configuration screen. Refer to Section 2.3.1.  

Network Type  Select Infrastructure or Ad-Hoc from the drop-down list box.  

Select Infrastructure to associate to an AP.  
Select Ad-Hoc to associate to a peer ad-hoc computer.  
Refer to Section 2.1.4 for more information. 

WEP Enabled  The WEP keys are used to encrypt data before transmitting. 

Select this check box to activate WEP encryption. Refer to Section 2.2 for more 
information. 

Ad-Hoc Channel  This field is activated if you select Ad-Hoc in the Network Type field.  

Select the channel number from the drop-down list box.  To associate to a peer ad-hoc 
computer, you must use the same channel as the peer ad-hoc computer.  

Transmit Rate  Select a transmission rate from the drop-down list box.  The default is Auto.  

Default  Click Default to return the field settings under Configuration back to the factory 

defaults.   

Apply  Click Apply to save and activate the field settings under Configuration.  

Status 

State 

This field displays the type of wireless network and the name and MAC address of the 
wireless device to which the ZyAIR is connected.  

Current Channel  This field displays the radio channel the ZyAIR is currently using.  

Current Tx Rate 

This field displays the current transmission rate of the ZyAIR in megabits per second.  

Throughput 
(byte/sec) 

 

TX  This field displays the number of data frames transmitted. 

RX  This field displays the number of data frames received.  

Link Quality 

The status bar and the percentage number show the quality of the signal.