VTech 2338 ユーザーズマニュアル
www.vtechphones.com
7
G
ett
in
g s
ta
rte
d
Installation
To single-line
telephone jack(RJ11C)
telephone jack(RJ11C)
Telephone line cord
Noise filter (optional)
(For DSL users)
To power outlet
AC power adaptor
Connection
1 . Choose a location for the base near an electrical outlet and telephone jack .
2 . Plug the connector of the base power adaptor to the connector jack at the bottom of the base unit .
2 . Plug the connector of the base power adaptor to the connector jack at the bottom of the base unit .
Then plug the adaptor into a standard electrical outlet (110V AC) not controlled by a wall switch .
3 . Connect the telephone line cord to the jack at the bottom of the base unit, and the other end to
the wall jack .
If you subscribe to DSL service
If there is interference during telephone conversations and/or your caller ID features are not functioning
properly, install a noise filter to the telephone line between the base unit and the telephone wall jack.
Contact your DSL provider for a noise filter.