bobcat 2200d ユーザーズマニュアル
Bobcat 2200 Diesel Vehicle
25
Operation & Maintenance Manual
REGULAR INTERVAL
SERVICE
Daily service by owner or trained
technician
technician
Engine
Check engine oil level; add if necessary. See Engine Oil Level Check
on page 28.
on page 28.
Check engine coolant; add if necessary. See Engine Coolant Level
Check on page 33.
Check on page 33.
Fuel filters
Drain water from fuel filter. See Draining Water from Fuel Filter on
page 34.
page 34.
Brakes
Check brake fluid; add if necessary. Check brake pedal for proper
operation. See Performance Inspection on page 11.
operation. See Performance Inspection on page 11.
Monthly service by owner or trained
technician
technician
Engine
Check engine circulating air passage; visually inspect unshrouded
area around engine exhaust for grass and debris and clean if
necessary. Check for grass and debris around the radiator.
area around engine exhaust for grass and debris and clean if
necessary. Check for grass and debris around the radiator.
Tires
Check air pressure and adjust if necessary. See DIESEL VEHICLE
SPECIFICATIONS on page 43.
SPECIFICATIONS on page 43.
Transmission and differentials
Check lubricant levels. Add if necessary. See Lubrication Level
Check for Front Differential, Transmission, and Rear Differential on
page 32.
Check for Front Differential, Transmission, and Rear Differential on
page 32.
General vehicle
Wash engine compartment and underside of vehicle. Do not wash
engine when hot.
engine when hot.
Semiannual service by trained
technician only (or every 50 hours of
operation, whichever comes first)
technician only (or every 50 hours of
operation, whichever comes first)
Battery
Clean terminals and wash dirt from casing; check electrolyte level.
Add distilled water if necessary. See page 31.
Add distilled water if necessary. See page 31.
Front wheel alignment and
toe-in
toe-in
Check and adjust if necessary. See Section 7 – Steering and Front
Suspension in the maintenance and service manual.
Suspension in the maintenance and service manual.
Electrical wiring and
connections
connections
Check for tightness and damage.
Brake system
Inspect master cylinder, brake lines, and hoses for damage or
leakage.
leakage.
Check park brake cables for damage; replace if necessary.
Check brake pads and discs; replace if necessary. See Section 6 –
Brake System in the maintenance and service manual.
Brake System in the maintenance and service manual.
Annual service by trained technician
only (or every 100 hours of operation,
whichever comes first)
only (or every 100 hours of operation,
whichever comes first)
Engine
Check for leaks around gaskets, fill plugs, etc.
Check the v-belt for proper tension or damage. Adjust or replace if
necessary.
necessary.
Change engine coolant.
See Section 15 – Radiator and Cooling System in the
maintenance and service manual.
See Section 15 – Radiator and Cooling System in the
maintenance and service manual.
Radiator
Check clamps for tightness; check hoses for cracks. Replace if
necessary.
necessary.
Engine air intake system
Check clamps for tightness; check hose for cracks.
General vehicle
Check for loose hardware and tighten if necessary.
Fuel filters
Replace. Dispose of used filters properly.
1000 hours of operation
Brake system
Replace park brake cable.