Viking Electronics K-1705-3 ユーザーズマニュアル

Our Technical Support Department is available for assistance Monday 8am - 4pm and Tuesday through Friday 8am - 5pm central time. So that we can give you better service, before you call please:
1. Know the model number, the serial number and what software version you have (see serial label).
2.  Have your Technical Practice in front of you.
3.  It is best if you are on site.

The following procedure is for equipment that has failed out-of-box (within 10 days of purchase):
1.  Customer must contact Viking’s Technical Support at 715-386-8666 to determine possible causes for the problem. The 

customer MUST be able to step through recommended tests for diagnosis.

2.  If the Technical Support Product Specialist determines that the equipment is defective based on the customer's input 

and troubleshooting, a Return Authorization (R.A.) number will be issued. This number is valid for fourteen (14) 
calendar days from the date of issue.

3.  After obtaining the R.A. number, return the approved equipment to your distributor, referencing the R.A. number. Your 

distributor will then replace the product over the counter at no charge. The distributor will then return the product to 
Viking using the same R.A. number.

The following procedure is for equipment that needs repair:
1.  Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (RA) 

number. The customer MUST have a complete description of the problem, with all pertinent information regarding the 
defect, such as options set, conditions, symptoms, methods to duplicate problem, frequency of failure, etc.

2.  Packing: Return equipment in original box or in proper packing so that damage will not occur while in transit. Static 

sensitive equipment such as a circuit board should be in an anti-static bag, sandwiched between foam and individual-

ly boxed. All equipment should be wrapped to avoid packing material lodging in or sticking to the equipment. Include 

ALL parts of the equipment. C.O.D. or freight collect shipments cannot be accepted. Ship cartons prepaid to:  

3. Return shipping address: Be sure to include your return shipping address inside the box. We cannot ship to a PO Box.
4. RA number on carton: In large printing, write the R.A. number on the outside of each carton being returned. 

Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of one year from the date of purchase from any authorized Viking distributor

or 18 months from the date manufactured, which ever is greater. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics, Inc., 1531
Industrial Street, Hudson, WI., 54016.  Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (R.A.) number.

This warranty does not cover any damage to the product due to lightning, over voltage, under voltage, accident, misuse, abuse, negligence or any damage caused by use of the product by the purchaser or

others.

NO OTHER WARRANTIES. VIKING MAKES NO WARRANTIES RELATING TO ITS PRODUCTS OTHER THAN AS DESCRIBED ABOVE AND DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTIES OR

MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.

EXCLUSION OF CONSEQUENTIAL DAMAGES. VIKING SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE TO PURCHASER, OR ANY OTHER PARTY, FOR CONSEQUENTIAL, INCIDENTAL,

SPECIAL OR EXEMPLARY DAMAGES ARISING OUT OF OR RELATED TO THE SALE OR USE OF THE PRODUCT SOLD HEREUNDER.

EXCLUSIVE REMEDY AND LIMITATION OF LIABILITY. WHETHER IN AN ACTION BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR ANY OTHER LEGAL THEO-

RY, ANY LIABILITY OF VIKING SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, OR AT VIKING'S OPTION, REFUND OF THE PURCHASE PRICE AS THE EXCLUSIVE REMEDY
AND ANY LIABILITY OF VIKING SHALL BE SO LIMITED.

IT IS EXPRESSLY UNDERSTOOD AND AGREED THAT EACH AND EVERY PROVISION OF THIS AGREEMENT WHICH PROVIDES FOR DISCLAIMER OF WARRANTIES, EXCLUSION OF CONSE-

QUENTIAL DAMAGES, AND EXCLUSIVE REMEDY AND LIMITATION OF LIABILITY, ARE SEVERABLE FROM ANY OTHER PROVISION AND EACH PROVISION IS A SEPARABLE AND INDEPENDENT
ELEMENT OF RISK ALLOCATION AND IS INTENDED TO BE ENFORCED AS SUCH.

Image Sensor:  1/4” color CMOS
Active Pixels: 640 x 480 @ 30 fps
Resolution: 420TVL
Sensitivity:  0.26 lux (20 IRE) F 2.0
Lens: 3.4mm pinhole, semi-conical
FOV (Field of View): 70°
Signal to Noise Ratio: 46 dB
Gamma:  0.45
Gain:  Automatic 36 dB
Synchronization: Internal
Back Light Compensation:  Off
White Balance: AWB
Shutter Mode: Electronic rolling shutter
Shutter Speed: Auto exposure or fixed
Frame Rate: 30 fps
Scan Mode: Interlaced
Contour Enhancement: Enabled
Dynamic Range:  73.4 dB
Iris Controls: Electronic (no DC signal)
Video Output: 1V p-p composite, NTSC, 75 Ohms

Power Input: 5-9V DC regulated (polarity protected) 6V DC
adapter included
Power Consumption: < 150mA
Connector: 6 pin JST SHR-06V-S-B
Wire: 7” flying leads, 24 AWG stranded, yellow = video out, red =
+6VDC, black = -/GND
Maximum Wire Run Length:  1000 ft with RG59/RG6 for video
and CAT5 for power (doubled pairs) and entry phone audio. 150 ft
with CAT5E for video, power and entry phone audio (longer video
runs are possible by using video balun tranceivers, see
Installation section).

Operating Temperature: -40°C / -40°F ~ 85° / 185°F
Storage Temperature: -40°C / -40°F ~ 90° / 194°F
Operating Humidity: 5% - 95% non-condensing

Dimensions WxHxD: 26mm x 24mm x 19mm (1.03” x 0.94” x
0.76”)
Weight: 13.4g (0.036 lbs)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the inter-
ference at his own expense.