Vulcan Materials vk series 1vk45c ユーザーズマニュアル

VK SERIES GAS FRYERS 

VULCAN-HART                                                                                                               F-32971 Rev. F (December  2011) 

-22-

 

 
 

 
 

   Never run water or boil out solution through filter and motor / pump.  Doing so 

 

 

 

   will void your fryer warranty.  

 
     Oil Temperature should be 300-350° F.  Use the provided crumb scoop to remove and suspend 

crumbs on the bottom of the tank before proceeding to Step 1. 

 

1.  Do not turn off the Fryer.  The power must be on throughout the entire filtering process.  

 

 Do NOT heat the fryer during the filtering procedure.  Permanent damage to your fry 

tank may occur and warranty may be voided. 
 

2.  Vulcan recommends adding an oil treatment media to the oil prior to filtering.  

 

3.  Make sure that the filter drawer is closed completely and that the suction tube and 

receptacle block are in the correct position. Fig. 5