Vulcan Materials vk series 1vk85c ユーザーズマニュアル

VK SERIES GAS FRYERS 

VULCAN-HART                                                                                                               F-32971 Rev. F (December  2011) 

-12-

 

  Open the door to the fryer.  Turn the power switch to the on position. 

 

PLUS® Filter Systems) 

 

Open the door to the fryer.  Select Liquid or Solid Shortening pressing the 
switch to  

the desired selection.  

 
 

Set temperature by turning the knob to the desired temperature.  

 
 

Press the power switch to the ON position.  The burners will not light until the 
next step is completed.   

 
 

Press the START switch once for the burners to light. The START switch is a 
momentary switch and will reset after being pressed. The indicator light will 
change from Red to Green.  Heating light will glow Yellow. 

 

 

The power burner will cycle on and off throughout the melt cycle. When the fry 
tank oil reaches 135° F the burners will stop cycling and remain on until the set 
temperature is reached. Once set temperature is reached the burners will cycle 
on and off to maintaining the set temperature. 

 
 
VKD solid state digital and VKC programmable controls:

 
For solid state digital and programmable computer controls the power burner will light 
automatically. The power burner will cycle on and off throughout the melt cycle and continue 
afterwards maintaining the set temperature.