Kenwood KDC-PS9018R ユーザーズマニュアル

Select the band/station that you want to have stored.

Press the button (#1-6) that you want to use for the station, for
at least two seconds.
The button number blinks once in the display to indicate that
the data has been stored. 

Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.

You can store six stations in each of the FM1, FM2, FM3, and
AM (MW and LW) bands.

Store the frequency of a station. You can then recall that
station with a single touch of a button.

Press the SRC (source) button repeatedly to select the tuner
mode. "TUNER" is displayed when the tuner mode has been
selected.

Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches
between the FM1, FM2 and FM3.
Press the AM button to select the MW and LW bands.

• Auto Seek Tuning

Press the 

¢ button to seek higher frequencies.

Press the 

4 button to seek lower frequencies.

• Preset station seek tuning

Press the 

¢ button to move to the next preset station (i.e.,

the one with the next highest number), and the 

4 button to

move to the last preset station (i.e., the one with the next
lowest number).

If the frequencies stored at the preset numbers receive
stations which were not originally memorized when traveling
long distances, the preset number is not displayed. In such
cases, pressing the 

4/¢ button to use preset station

seek will receive channel 1.

• Manual Tuning

Press the 

¢ button to increase the frequency by one step.

Press the 

4 button to decrease the frequency by one step.

• The ST indicator lights up when stereo broadcasts are being

received.

• Please see the menu settings about selecting tuning mode.

(page 31)

— 19 —

KDC-PS9018R(M_E)_r3  2003.06.13  03:04 PM  Page 19