Xerox Pro 385 ユーザーズマニュアル
8-6
Maintenance
Automatic Document Feeder Rubber Pad
Replacement
Replacement
1
Open the Control Panel Cover.
2
Insert a small flat blade screwdriver under the right and left sides of the
ADF Holder.
ADF Holder.
3
Apply upward pressure to release the two locking tabs on each side of
the assembly.
the assembly.
4
Remove the assembly and replace the ADF Rubber.
5
Reassemble the components in the order shown in the diagram above.
6
Place the assembly back onto the ADF Holder.
7
Press down on the assembly until it locks into position.
8
Close the Control Panel.
ADF Holder
ADF Sheet
ADF Rubber