Kenwood dnx890hd ユーザーズマニュアル

USB Device 

Error!!

The connected USB device is rated 

a current capacity higher than the 

allowable limit.

Check the USB device. Some trouble may have 

occurred to the connected USB device.
Change the source to any source other than 

USB. Remove the USB device.

Authorization 

Error

Connection to the iPod has failed.

• Remove the iPod and then reconnect it. 
• The unit does not support the iPod. 

See 

Update your 

iPod

The iPod’s software is an older 

version which the unit can not 

support.

The unit may not support the connected iPod 

model.
Confirm that the software for the iPod is the 

latest version.  

See 

Navigation 

Error. Please 

turn on power 

again later.

The communication error has 

occurred due to severely cold 

temperature.

Turn on power again after warming your car 

interior.

Check 
Application

The Aha application is stopped.

Start the Aha application of the your device.

Please update 
your Aha 
application

The Aha application is an older 

version which the unit can not 

support.

Confirm that the Aha application is the latest 

version.

Check Tuner

A SiriusXM tuner is not connected 

to this unit. 

Check that the connected SiriusXM Connect 

Vehicle Tuner is connected.

Subscription 

Updated - Press 

Return To 

Continue

The SiriusXM subscription has been 

renewed. 

Pressing the Control knob will clear the error 

message. 

Channel Not 

Available

The currently selected channel is 

unavailable. 

—

Ch 

Unsubscribed

The currently selected channel is 

not subscribed to. 

—

Check Antenna No antenna is connected to the 

SiriusXM tuner.

Check that an antenna is connected to the 

SiriusXM tuner.

No Signal

No SiriusXM radio signal is received. 

—

The unit returns to factory settings.

•  Disconnect the USB device before pressing the <Reset> button. Pressing the <Reset> button with the USB device 

connected can damage the data stored in the USB device. For how to disconnect the USB device, see 

.

•  When the unit is turned on after resetting, the Initial SETUP screen appears. See 

.