Konica Minolta magicolor 2450 ユーザーズマニュアル
Selecting Driver Options/Defaults (for Windows)
11
"
With Windows NT 4.0, right-click the KONICA MINOLTA mc2450
PCL6 printer icon or the KONICA MINOLTA mc2450 PS printer
icon in the Printers directory, and then click Document Defaults.
Skip to step 10.
PCL6 printer icon or the KONICA MINOLTA mc2450 PS printer
icon in the Printers directory, and then click Document Defaults.
Skip to step 10.
8
Select the General tab.
9
Click Printing Preferences.
Printing Preference dialog box appears.
10
Select the default settings for your printer, such as the default media for-
mat you use, on the appropriate tabs.
mat you use, on the appropriate tabs.
11
Click Apply.
12
Click OK to exit from the Print preference dialog box.
13
Click OK to exit from the Properties dialog box.
Windows Me/98SE (KONICA MINOLTA mc2450 PCL6)
1
Choose the driver’s properties as follows:
–
From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the KONICA MINOLTA mc2450
PCL6 printer icon and choose Properties.
the Printers directory. Right-click the KONICA MINOLTA mc2450
PCL6 printer icon and choose Properties.
2
Select the Configure tab.
3
Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 7.
the next step. Otherwise, continue with step 7.
4
Click the Refresh to automatically configure installable options.
"
The Refresh is available only if bi-directional communication is
available with the printer; otherwise it is grayed out.
available with the printer; otherwise it is grayed out.
5
From the Device Options list, select an option, one at a time, and then
select Enable or Disable from the Settings menu.
select Enable or Disable from the Settings menu.
"
If Printer Memory is selected, select 128 MB, 384 MB or 640 MB,
according to the installed memory. The factory default setting is
128 MB.
according to the installed memory. The factory default setting is
128 MB.
6
Click Apply.
7
Select the default settings for your printer, such as the default media for-
mat you use, on the appropriate tabs.
mat you use, on the appropriate tabs.
8
Click Apply.
9
Click OK.