Konica Minolta di181f ユーザーズマニュアル

ページ / 70
General Information
1
Rev. /
Di181f
1-7
1.4
Safety Precautions
Follow the safety advice to ensure safe operation of the machine.
G
Connect the machine only to a 200 - 240 V/ 50 Hz earthed power point.
G
Make sure the power is not turned off over night.
G
Always pull at the plug, never at the wire, when you want disconnect 
the machine from the power supply. If possible, connect the machine 
directly to a wall outlet.
G
To facilitate communication always keep the machine switched on and 
program the correct user data. Make sure to enter the correct user 
names.
G
Do not unscrew any parts, if not specifically requested in this manual. 
If necessary contact your technical service.
G
Never open the machine while it is transmitting or printing.
G
Take care not to let humidity into the machine.
G
Make sure no objects fall into the machine.
G
If any problem occurs that can not be solved by the procedures 
described in this manual make sure you contact the technical service.
G
Follow the recommended maintenance procedures regularly..
Used cartridges may be taken back by the technical service station as a 
part of the maintenance procedures.
Laser Safety
This fax machine contains a page printer which operates by means of a 
laser. This fax machine contains a page printer which operates by means 
of a laser. This machine does not impose any danger as long as it is used 
according to the procedures described in this manual. The laser is limited 
to the interior of the machine. The environment is protected from the laser 
emission by the covers of the machine.
Internal Laser Radiation
Maximum radiation: 1,3 x 10
-3
 (mW) Wavelength: 770-810 (nm)
The machine works with an invisible class IIIb laser. The printer head unit 
is not field service item.
Ozone Release Warning
During printer operation, a small quantity of ozone is released. This 
amount is not large enough to harm anyone. However, be sure the room 
where the fax machine is being used has adequate ventilation,. especially 
if you are printing a high volume of material or if the fax machine is being 
used continuously over a long period.