Konica Minolta magicolor 2400w ユーザーズマニュアル
Media Types
23
Envelopes
Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
three layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
Use envelopes that are
Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
sharp folds and edges, and ordinary gummed flaps
"
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
Approved for laser printing
Dry
DO NOT use envelopes that have
Sticky flaps
Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal-
ing
ing
Transparent windows
Too rough of a surface
Material that will melt, vaporize, offset, discolor, or emit dangerous fumes
Been presealed
Capacity
Tray 1
Up to 10 envelopes, depending on their
thickness
thickness
Orientation Face up
Driver
Media Type
Driver
Media Type
Envelope
Weight
91 to 163 g/m² (25 to 43 lb)
UG2400W_UK.book Page 23 Thursday, November 11, 2004 12:16 PM