Konica Minolta magicolor 2400w ユーザーズマニュアル

"

Printer 
power is not 
on.

The power cord is not 
correctly plugged into 
the outlet.

Turn off the printer, confirm that the 
power cord is correctly plugged into the 
outlet, and then turn on the printer.

Something is wrong 
with the outlet con-
nected to the printer.

Plug another electrical appliance into 
the outlet and see whether it operates 
properly.

The power switch is 
not correctly turned 
on (I position).

Turn the power switch off (O position), 
then turn it back to the on (I position). 

The printer is con-
nected to an outlet 
with a voltage or fre-
quency that does not 
match the printer 
specifications.

Use a power source with the specifica-
tions listed in appendix A, “Technical 
Specifications.”

Printing 
takes too 
much time.

The printer is set to a 
slow printing mode 
(for example, thick 
stock or transpar-
ency).

It takes more time to print with special 
media. When using regular paper, 
make sure that the media type is set 
properly in the driver.

The printer is set to 
power saving mode.

It takes time for printing to start in 
power saving mode.

The job is very com-
plex.

Wait. No action needed.

A toner cartridge for a 
different region or an 
unapproved toner 
cartridge is installed.

Install a KONICA MINOLTA toner 
cartridge approved for your specific 
printer.

Blank pages 
come out 
during print-
ing.

One or more of the 
toner cartridges are 
defective or empty.

Check the toner cartridges. The image 
will not be printed if the cartridges are 
empty.

The wrong media is 
being used.

Check that the media type set in the 
driver matches the media loaded in the 
printer.

UG2400W_UK.book  Page 71  Thursday, November 11, 2004  12:16 PM