Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. ZyXEL Communications
  4. zyair g-4100
  5. ユーザーズマニュアル

ZyXEL Communications zyair g-4100 ユーザーズマニュアル

ダウンロード
ページ / 25
ZyAIR G-4100 
6 
 
 
Table 2 Front Panel LEDs 
LED STATUS 
DESCRIPTION 
ZyAIR 
On (Blue) 
The ZyAIR is ready, but is not sending/receiving data through the wireless 
LAN. 
 
Blinking (Blue) 
The ZyAIR is sending/receiving data through the wireless LAN. 
LAN (1-4) 
On (Green) 
The port is connected to a 10/100Mbps Ethernet device.  
 
Blinking (Green) 
The port is receiving or sending data. 
 
Off 
The port is not connected to a 10/100Mbps Ethernet device. 
WAN 
On (Green)  
The WAN port has a connection to your cable or DSL modem. 
 
Blinking (Green) 
The WAN port is sending or receiving packets. 
 
Off 
The WAN link is not ready, or has failed. 
SYS 
On (Green) 
The ZyAIR is ready and running. 
 
Off 
The ZyAIR is not ready or has failed. 
PWR 
On (Green) 
The ZyAIR is receiving power.  
 
Off 
The ZyAIR is not receiving power. 
1.4 Factory Defaults 
Table 3 Factory Defaults 
Username 
 “admin” (case sensitive) 
WAN IP Address 
DHCP Client (dynamic WAN IP) 
Password 
 “1234” 
LAN IP Address 
192.168.1.1 
  
LAN 
DHCP 
Server 
2 Setting Up Your Computer’s IP Address 
Skip this section if your computer is already set up to accept a dynamic IP 
address. This is the default for most new computers. 
The ZyAIR is already set up to assign your computer an IP address. Use this section to set up your 
computer to receive an IP address or assign it a static IP address in the 192.168.1.2 to 192.168.1.254