Dynalink RTA770W ユーザーズマニュアル

ページ / 110
ADSL Router User Manaul 
 
 
Supports up to 4096 learning MAC addresses 
 
Transparent Bridging between 10/100 Mb Ethernet and USB 
Routing Features 
 
NAT (Network Address Translation) / PAT (Port Address Translation) let multiple users on the 
LAN to access the internet for the cost of only one IP address. 
 
ALGs (Application Level Gateways): such as NetMeeting, MSN Messenger, FTP, Quick Time, 
mIRC, Real
 
Player, CuSeeMe, VPN pass-through, etc. 
 
Port Mapping: the users can setup multiple virtual servers (e.g., Web, FTP, Mail servers) on 
user’s local network. 
 
Support DMZ 
 
UPnP IGD (Internet Gateway Device) with NAT traversal capability 
 
Static routes, RFC1058 RIPv1, RFC1723 RIPv2 
 
DNS Relay 
 
ARP Proxy 
Security Features 
 
PAP (RFC1334), CHAP (RFC1994) for PPP session 
 
Firewall support IP packets filtering based on IP address/Port number/Protocol type 
 
Support DoS (Deny of Services) which detect & protect a number of attacks (such as 
SYN/FIN/RST Flood, Smurf, WinNuke, Echo Scan, Xmas Tree Scan, etc) 
Wireless LAN Compliance Features   
 
IEEE 802.11g and IEEE 802.11b 
 
Data Rate: 54, 48, 36, 24, 18, 12, 9, 6 Mbps for 802.11g/11, 5.5, 2, 1 Mbps for 802.11b 
 
Modulation Technique: OFDM for 802.11g; CCK (11 Mbps, 5.5 Mbps) for 802.11b; DQPSK 
(2Mbps) for 802.11b; DBPSK (1 Mbps) for 802.11b 
 
Network Architecture: infrastructure 
 
Operating Frequency: 2.4 ~ 2.497 GHz 
 
Operating Channels: depending on local regulations. For example, 11Channels (Northern 
America), 13 Channels (Europe), and 14 Channels (Japan) 
 
RF Output Power: 15dBm maximum 
 
Antenna Connectors: Hardware diversity support. One external antenna and one internal 
antenna are provided. 
 
Coverage Area:   
802.11g: LOS (Outdoors): Max. 50 meters; Indoors: Max. 20 meters 
802.11b: LOS (Outdoors): Max. 180 meters; Indoors: Max. 60 meters 
 
Power Consumption:   
TX peak: 550 mA @ 3.3 VDC; RX peak: 350 mA @ 3.3 VDC 
Idle: 225 mA @ 3.3 VDC; Radio disabled: < 10 mA @ 3.3 VDC 
 
Support WEP (Wired Equivalent Privacy) mechanism which uses RC4 with 64-bit or 128-bit 
key length   
 
Support WPA, WPA-PSK, WPA-802.1X 
 
Support the Access Control function: only registered WLAN clients can be allowed to 
associate to the router. 
 
SSID can be hidden for the security issue (Don’t broadcast SSID).