Namco Bandai Games 90500148 ユーザーズマニュアル
Page 71
6-5-4
Replacing the Solenoid
1.
Remove the Gun Covers. (see 6-5-3 page 70)
2.
Disconnect the Solenoid Connector.
3.
Remove 1off flange screw (M3x10) and remove the Solenoid Bracket.
4.
Remove 1off flange screw (M3x8) and detach the earth wire.
5.
Loosen the nut (16mm) and pull out the Solenoid.
6.
Remove 2off flange screws (M4x6) and detach the Slide Guide.
7.
Pull out the Solenoid Plunger, taking care not to lose the Spring.
8.
Reassemble in reverse order.
Note:
When reassembling match the D-type hole of the solenoid bracket to the
D shape of the solenoid and ensure that the ‘E’ ring and spacers are in
their correct positions.
D shape of the solenoid and ensure that the ‘E’ ring and spacers are in
their correct positions.
Solenoid
Connector
Solenoid
Solenoid bracket
Spring Plunger
Plunger
Flange screw
(M4x6)
(M4x6)
Flange screw
(M3x8)
(M3x8)
Socket cap screw (M 3x10)
Gun cover L
Solenoid
bracket
bracket
Slide guide
Slide guide
Nut (16mm)
E-type snap rings
Spacers
Toothed washer
Earth wire
Harness outlet (it must
face downwards)
face downwards)