Crestron electronic ilux cls-c6rf ユーザーズマニュアル

 

 

Each unit is available in three colors: almond, black, or 
white. The letter at the end of the product name, ‘A’, ‘B’, or 
‘W’, denotes the color (e.g., a CLS-C6MRFA is an almond 
unit).  

The iLux

™

 units, CLS-C6RF and CLS-C6MRF, are wall-

mounted complete integrated lighting systems that can 
function as standalone devices and/or be part of a Crestron

®

 

solution total control system network (Cresnet

®

). The units 

are functionally identical except that the CLS-C6MRF 
includes a built-in motion sensor.  

Following are specifications for the iLux units. 

Power Requirements 

Line Power, 120 VAC, 60Hz 

Load Ratings

1

 

 

Max load per channel 

 

 

 
 
 

Min load per channel 

 
 

Max load per unit 

 

 
800 W/VA  
(6.6 Amps @ 120 VAC), 
Expandable via Expansion 
Modules (sold separately) 
15 W/VA  
(0.125 Amps @ 120 VAC) 
1920 W/VA  
(16 Amps @ 120 VAC) 

Note that if the unit is fed from an arc fault circuit interrupter 
(required if controlling loads in a bedroom), the maximum total 
load is 1000 W/VA 

Load Types

1

 

Incandescent, magnetic low 
voltage, neon/cold cathode, 
dimmable 2-wire fluorescent, 
and non-dim lighting  
(also: electronic low voltage,  
3-wire and 4-wire fluorescent, 
High-Inrush Switching,

 

and 

277V via expansion modules; 
sold separately) 

IR Receiver 

For use with Crestron IR 
remote (sold separately). 

RF Wireless 
 RF 

Transceiver 

 
 
 
 Range 

(typical) 

 
 
 
 
 Gateway 

 
2-way RF, 2.4 GHz ISM 
Channels 11-26 (2400 to 
2483.6 MHz), IEEE 802.15.4 
compliant 
150 feet indoor, 250 feet 
outdoor; subject to site-specific 
conditions; range is increased 
by adding additional devices or 
C2N-MNETRPT repeater; 
Requires a C2N-MNETGW RF 
gateway 

Motion Detector  
(CLS-C6MRF only) 
 Type 
 Range 

 
 
Infrared 
20 to 30 feet at 4-foot elevation 

Default MNET ID 

1F 

Control System Update Files

 2, 3 

 

2-Series Control System 

 
Version 2.004.CUZ or later 

Firmware 

CLS-C6.v1.0.upg or later 

 

Each unit provides automated control of up to six channels 
of lighting loads, including incandescent, magnetic low-
voltage, neon/cold cathode, and two-wire dimmable 
fluorescent. Each unit also provides automated control of up 
to six groups of shade and drape controllers for motorized 
window treatments, screens, and lifts. 

Front panel operation provides manual control of lighting 
loads and shade groups as well as access to up to sixteen 
scenes (lighting level/shade position combinations). 

A built-in IR receiver allows for wireless operation using an 
optional infrared remote generating standard RC5 
commands; a built-in motion detector (CLS-C6MRF only) 
enables automated control based on room occupancy. 

Up to 16 Crestron keypads (sold separately) can be used 
with each unit for control of rooms that have several 
entrances or work areas. Each unit also supports up to eight 
additional CLS-C6RF units, enabling systems of up to 54 
lighting channels and 54 shade groups. 

The CLS-C6RF employs Crestron's infiNET technology to 
enable a wireless link to a 2-Series control system. A single 
C2N-MNETGW gateway connected to the control system 
enables 2-way wireless communications between the iLux 
system and the central control system, allowing iLux's 
functions to be controlled from touchpanels, RF wireless 
remotes, and even computers. 

 

 

15 Volvo Drive   Rockleigh, NJ 07647

   

Tel: 888.CRESTRON

   

Fax: 201.767.7576

Specifications subject to 

www.crestron.com

change without notice.