Namco Bandai Games 90500017 ユーザーズマニュアル
Page 64
8-6 Replacing the Base Bellows
The upper unit of the ride assy weighs approx. 90kg. Ensure that at least
FIVE (5) people are available to remove or install the assy, and that there
is sufficient space to work safely.
FIVE (5) people are available to remove or install the assy, and that there
is sufficient space to work safely.
The front of the upper ride assy, where the coin tower is situated, is
heavier than the back. Take care when lifting that the assy does not tip
forward.
heavier than the back. Take care when lifting that the assy does not tip
forward.
1.
Remove the seat assy.
(see section 8-3 page 59)
2.
Remove sixteen (16) security screws (M4x10), and remove the upper and
lower bellows fixing plates on each side of the ride assy. (4 screws per
fixing plate).
lower bellows fixing plates on each side of the ride assy. (4 screws per
fixing plate).
3.
Remove twelve (12) security screws (M4x10), and remove the upper and
lower bellows retaining plates from the front and rear of the ride assy. (3
screws per retaining plate)
lower bellows retaining plates from the front and rear of the ride assy. (3
screws per retaining plate)