Namco Bandai Games 90500017 ユーザーズマニュアル
Page 68
8-8 Replacing the Roll Control Potentiometer
1.
Remove the paddle vac-form covers.
(see section 8-7 page 66)
2.
Disconnect the connector.
3.
Loosen the grub screw (M4x6) in the nylon pot extension shaft, and
remove the potentiometer complete with the contol bracket.
remove the potentiometer complete with the contol bracket.
4.
Remove the control potentiometer from the bracket and replace with a
new potentiometer.
new potentiometer.
When refitting the potentiometer ensure that locating tag on the potentiometer
is fitted into the hole in the bracket, and that the grub screw engages on the
flat of the potentiometer shaft.
The potentiometer must be fitted with the extension shaft and insulation block
to maintain conformity with CE regulations.
is fitted into the hole in the bracket, and that the grub screw engages on the
flat of the potentiometer shaft.
The potentiometer must be fitted with the extension shaft and insulation block
to maintain conformity with CE regulations.
Note:
After re-assembly and refitting, ensure that the game is re-
initialized before normal game play.
initialized before normal game play.
(see section 7 page 55)