Clarion DXZ276MP ユーザーズマニュアル
English
10
DXZ276MP/DXZ376MP
6. OPERATIONS
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “
CONTROLS
” on page ii (unfold).
Basic Operations
CAUTION
Be sure to lower the volume before
switching off the unit power or the ignition
key. The unit remembers its last volume
setting. If you switch the power off with the
volume up, when you switch the power back
on, the sudden loud volume may hurt your
hearing and damage the unit.
switching off the unit power or the ignition
key. The unit remembers its last volume
setting. If you switch the power off with the
volume up, when you switch the power back
on, the sudden loud volume may hurt your
hearing and damage the unit.
Turning on/off the power
Note:
• Be careful about using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the [
SRC
] button.
2. Press and hold the [
SRC
] button for 1
second or longer to turn off the power for the
unit.
unit.
Note:
• System check
The first time this unit is turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the power is
turned on, the “
connections are completed, it must be checked
what equipment is connected. When the power is
turned on, the “
S-CHECK
” appears in the display,
then the unit returns to the clock display mode.
The system check starts within the unit. When the
system check is complete, press the [
The system check starts within the unit. When the
system check is complete, press the [
SRC
] button
again.
Selecting a mode
1. Press the [
SRC
] button to change the
operation mode.
2. Each time you press the [
SRC
] button, the
operation mode changes in the following
order:
order:
Radio
➜
CD/MP3/WMA
➜
(iPod BB)
➜
(CD
changer)
➜
(DVD changer)
➜
(TV)
➜
AUX
➜
Radio...
∗
External equipment not connected with
CeNET is not displayed.
CeNET is not displayed.
Adjusting the volume
1. Turning the [
ROTARY
] knob clockwise
increases the volume; turning it
counterclockwise decreases the volume.
counterclockwise decreases the volume.
∗
The volume level is from 0 (minimum) to 33
(maximum).
(maximum).
Switching the display
Press the [
D
] button to select the desired
display.
∗
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
For details, refer to the subsection “
Turning the
screen saver function on or off
” in section
“
Operations Common to Each Mode
”.
DXZ376MP_EN.book 10 ページ ２００６年１２月１３日 水曜日 午後４時４６分