Kenmore 14616132110 ユーザーズマニュアル

 

LP Tank Exchange 

 
• Many retailers that sell grills offer you the option of replacing 

your empty LP tank through an exchange service. Use only those 
reputable exchange companies that inspect, precision fill, test 
and certify their cylinders. Exchange your tank only for an OPD 
safety feature-equipped tank as described in the "LP Tank" 
section of this manual. 

• Always keep new and exchanged LP tanks in upright position 

during use, transit or storage. 

• Leak test new and exchanged LP tanks BEFORE connecting to 

grill.   

 
 
 

Connecting Regulator To The LP Tank 

 
1. LP tank must be properly secured onto grill. (Refer to   

assembly section.)   

2. Turn all control knobs to the OFF position. 
3. Turn LP tank OFF by turning OPD hand wheel clockwise to a   

full stop. 

4. Remove the protective cap from LP tank valve. Always use   

cap and strap supplied with valve.   

LP Tank Leak Test 
For your safety 

• Leak test must be repeated each time LP tank is exchanged or 

refilled. 

• Do not smoke during leak test. 
• Do not use an open flame to check for gas leaks. 
• Grill must be leak tested outdoors in a well-ventilated area, 

away from ignition sources such as gas fired or electrical 
appliances. During leak test, keep grill away from open flames 
or sparks.   

• Use a clean paintbrush and a 50/50 mild soap and water 

solution. Brush soapy solution onto areas indicated by arrows 
in figure below. Leaks are indicated by growing bubbles.   

If “growing” bubbles appear do not use or move the LP 

tank. Contact an LP gas supplier or your fire department!   

5. Hold regulator and insert nipple into LP 

tank valve. Hand-tighten the coupling   
nut, holding regulator in a straight line 
with LP tank valve so as not to crossth- 
thread the connection.   

   

16132-40200104 • 5 

▲Do not use household cleaning agents. Damage to the gas   

train components (valve/hose/regulator) can result.