Xerox 135 ユーザーズマニュアル
Printer components and options
3-6
Installation Planning Guide
Bypass transport
printer
configurations
The following printer configurations may have the bypass
transport, illustrated below:
transport, illustrated below:
•
Printer with inverter feeder/stacker and 1 feeder/stacker
•
Printer with inverter feeder/stacker and 2 feeder/stackers
Figure 3-6. Printer with inverter feeder/stacker,
one feeder/stacker, and bypass transport
Figure 3-7. Printer with inverter feeder/stacker,
two feeder/stackers, and bypass transport
Roll feeder support (DP155 and DP180 EPS only)
The roll feeder option may be installed in the inverter feeder/
stacker module, replacing the feeder tray. This option does not
require DFA or input enablement software, or any additional
hardware.
stacker module, replacing the feeder tray. This option does not
require DFA or input enablement software, or any additional
hardware.
The maximum number of feeder/stacker modules supported for
this configuration is four, including the inverter module with the
roll feeder. With the two processor feeder trays, this makes a
total of six input trays possible.
this configuration is four, including the inverter module with the
roll feeder. With the two processor feeder trays, this makes a
total of six input trays possible.