Zalman 9500at ユーザーズマニュアル

※

The specifications of any product may change without prior notice to improve performance.

4

②

②

Align the Clip Support for Socket 775 (

⑥

) and the Backplate for Socket 775(

⑦

) with the mounting

holes of the motherboard and fasten them together by using the Clip Support Fixing Bolts (

⑤

). 

The Lever Slot on the Clip Support (

⑥

) should be properly oriented on the hinged side of the Socket

Lever when installing. 

※

※ The Backplate Support on the Backplate for Socket 775 (

⑦

) can be removed if deemed

unnecessary. 

③

③

Clean off particles and residue from the top of

the CPU. Then spread the included thermal

grease (

②

) on top of the CPU.

※ Note

Do not exert excessive force on the fan with the driver while installing. 

Exerting excessive force on the fan can cause damage to the product.  

Clip Support Fixing Bolt, 

⑤

Clip Support for Socket 775, 

⑥

Motherboard

Backplate for Socket 775, 

⑦

Backplate Support

Socket Lever Hinge

Socket Lever

Socket Slot

④

④

Insert two bolts (

④

) into the holes on the clip (

③

) and place CNPS9500 AT on the center of the  CPU.

CNPS9500 AT must be aligned with the backside system fan in the same flow direction. 

Slightly fasten the bolts (

④

) on the holes of the clip supports for Socket 775 (

⑥

), then fasten the

bolts in an alternating manner until the clip (

③

) is completely pressed against the clip supports.  

Bolt, 

④

Clip, 

③

CPU (IHS)

Thermal Grease