ZyXEL Communications ZYWALL10 ユーザーズマニュアル

 ZyWALL 10 Internet Security Gateway

Hardware Installation & Initial Setup

2-11

System Name

Choose a descriptive name for identification purposes. It is
recommended you enter your computer’s “Computer name” in this
field. This name can be up to 30 alphanumeric characters long.
Spaces are not allowed, but dashes “-” and underscores "_" are
accepted.

ZyWALL_10

Domain Name

Enter the domain name (if you know it) here. If you leave this field
blank, the ISP may assign a domain name via DHCP. You can go to
menu 24.8 and type "sys domain name" to see the current domain
name used by your router.

If you want to clear this field just press the [SPACE BAR]. The
domain name entered by you is given priority over the ISP assigned
domain name.

zyxel.com.tw

Edit Dynamic
DNS

Press the [SPACE BAR] to select Yes or No (default). Select Yes to
configure Menu 1.1 — Configure Dynamic DNS discussed next.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [ESC] at any time to cancel.

To configure Dynamic DNS, go to Menu 1 — General Setup and use the [SPACE BAR] to select Yes in
the Edit Dynamic DNS field. Press [ENTER] to display Menu 1.1— Configure Dynamic DNS (shown
next).

Follow the instructions in the next table to configure Dynamic DNS parameters.

Menu 1.1 - Configure Dynamic DNS

Service Provider = WWW.DynDNS.ORG
Active= Yes
Host= me.ddns.org
EMAIL= mail@mailserver
User= username
Password= ******
Enable Wildcard= No

Press ENTER to confirm or ESC to cancel: