Konica Minolta pi5500 ver2 pcl um ユーザーズマニュアル
Before Using the Printer Driver
1
Pi5500
1-7
1.2
Settings Made on the Machine
The following functions must be set on the machine using its Utility Mode,
as they relate to the controller.
as they relate to the controller.
Priority Device
Select the priority use of the machine, either as a copier or printer.
l Copier:
The machine is used as a copier.
The machine starts the print cycle only after it has received the entire
data of a particular print job.
data of a particular print job.
The machine can be used for copying, since it starts printing only after
it has received the entire data of the job for printing. This means that
more time is available to you for copying, but you have to wait for a
longer time before a particular print job is done.
it has received the entire data of the job for printing. This means that
more time is available to you for copying, but you have to wait for a
longer time before a particular print job is done.
l Printer:
The machine is used as a printer.
The machine starts the print cycle before it completes receiving the
entire data of a particular print job.
entire data of a particular print job.
On receiving the data for one page, the machine starts printing,
accepting no other job for copying. This means that less time is
available to you for copying, but you do not have to wait long before
a particular print job is done.
accepting no other job for copying. This means that less time is
available to you for copying, but you do not have to wait long before
a particular print job is done.
On Line / Ready
l On Line key
Even if On Line key is pressed, On Line/Off Line of printer cannot be
switched.
switched.
A lit lamp indicates that the machine is in the On Line mode.
l Ready Lamp
Data can be transferred while this lamp stays lit up.
The lamp remains blinking while data is being transferred.
The lamp remains blinking while data is being transferred.