Konica Minolta pi5500 ver2 pcl um ユーザーズマニュアル
2
Installing the Printer Driver
2-16
Pi5500
Making General Settings Before Using the Printer
The printer driver requires setting of items that are common to all print
jobs, including the port to which the printer cable is connected and any
optional devices configured with the machine. These settings must be
made using property sheets available from the Properties command after
the printer driver has been installed, or whenever the operating
environment is changes.
jobs, including the port to which the printer cable is connected and any
optional devices configured with the machine. These settings must be
made using property sheets available from the Properties command after
the printer driver has been installed, or whenever the operating
environment is changes.
The most common settings were made when the printer driver was
installed, meaning that you do not usually need to change them. Some
items must, however, be changed in the following cases.
installed, meaning that you do not usually need to change them. Some
items must, however, be changed in the following cases.
Cases where changes are necessary
Applicable
property sheets
property sheets
Remark
l
You want to add a comment to distinguish the
printer from others
printer from others
“General”
l
You want to share the machine with other
computers connected to the same network (this
setting must be made on the computer that is
directly connected to the controller)
computers connected to the same network (this
setting must be made on the computer that is
directly connected to the controller)
“Sharing”
l
The computer’s connecting port has been
changed
changed
l
You want to change the conditions for the
display of a timeout error
display of a timeout error
l
You want to designate a port to which the
machine is connected via a network (this setting
must be made on a computer that is connected
to the controller via a network)
machine is connected via a network (this setting
must be made on a computer that is connected
to the controller via a network)
"Ports"
l
You want to restrict use conditions of printer.
l
You want to change settings in spool condition.
l
You want to change OS-dependent settings.
"Advance"
Function
available only in
Windows 2000
available only in
Windows 2000
l
This setting is not related to printing.
“Color
Management”
Management”
Function
available only in
Windows 2000
available only in
Windows 2000
l
You want to restrict access to the machine
l
You want to check the accounts of the machine
users
users
"Security"
l
This setting is not related to printing.
"Processing"
l
You want to specify a time frame for the
machine operation.
machine operation.
"Scheduling"
Function
available only in
Windows NT 4.0
available only in
Windows NT 4.0