Konica Minolta pi5500 ver2 pcl um ユーザーズマニュアル
Pi5500
X-1
Welcome
Thank you for purchasing the controller.
This Operator’s Manual explains how to run print cycles on the machine
to which the controller is connected. It also gives precautions that you
should review before attempting to actually use the controller. So first
read this manual carefully and thoroughly; then keep it close at hand so
you can refer to it whenever it becomes necessary.
to which the controller is connected. It also gives precautions that you
should review before attempting to actually use the controller. So first
read this manual carefully and thoroughly; then keep it close at hand so
you can refer to it whenever it becomes necessary.
When operating the controller and machine, follow the instructions given
in this manual and in the one for the machine. Do not attempt to touch
any part that is not covered in these manuals. To prevent possible
hazardous conditions, never attempt to disassemble or alter any pieces
of equipment, either.
in this manual and in the one for the machine. Do not attempt to touch
any part that is not covered in these manuals. To prevent possible
hazardous conditions, never attempt to disassemble or alter any pieces
of equipment, either.
Some of the screens shown in this manual may look different from what
you will view in actual applications.
you will view in actual applications.
Trademark Acknowledgments
Minolta is a registered trademark of MINOLTA CO., LTD.
Microsoft, Windows 95, Windows 98, Windows Me, Windows 2000 and
Windows NT 4.0 are registered trademarks of Microsoft Corporation.
Windows NT 4.0 are registered trademarks of Microsoft Corporation.
IBM and PC/AT are registered trademarks of International Business
Machines Corporation.
Machines Corporation.
PCL is a registered trademark of Hewlett-Packard Company.
All other products or brand names are trademarks or registered
trademarks of their respective companies or organizations.
trademarks of their respective companies or organizations.