Konica Minolta pi5500 ver2 pcl um ユーザーズマニュアル
3
Property Sheets
3-16
Pi5500
Functions of the “Detail Of Output Setting” Dialog Box
Settings can be made for finishing functions including stapling, hole
punching and folding.
punching and folding.
1. Staple <when Mailbin Finisher, Single-staple Finisher, Multi-staple
Finisher or Folding Finisher is installed>
This function allows you to staple one set of printed documents at a
time.
time.
m
Off:
Printed documents are not stapled.
Printed documents are not stapled.
m
Corner Staple:
Printed documents are stapled at their corners.
Printed documents are stapled at their corners.
m
Long Edge:
<when Multi-staple Finisher or Folding Finisher is installed>
The documents are stapled along the long edge.
<when Multi-staple Finisher or Folding Finisher is installed>
The documents are stapled along the long edge.
m
Short Edge:
<when Multi-staple Finisher or Folding Finisher is installed>
The documents are stapled along the short edge.
<when Multi-staple Finisher or Folding Finisher is installed>
The documents are stapled along the short edge.
m
Center:
<when Folding Finisher is installed>
<when Folding Finisher is installed>
The documents are stapled at the center.
NOTES
è
If “Staple” is set, printed pages are fed out into the Elevator Tray.
è
The stapling position is either the top left corner or the top right corner
depending upon the direction of the paper and the printing direction.
depending upon the direction of the paper and the printing direction.
1
2
3