Konica Minolta 7415 ev1 ユーザーズマニュアル
5-6
When
an Indicator Lights Up
Chap
te
r 5
3. Paper Empty Indicator
How to replenish the paper supply
Remove the Manual Bypass Tray.
Open the Document Guide Plates.
Set the paper into the tray so that its front
side is facing up.
side is facing up.
NOTE
The paper should be loaded no higher than the
The paper should be loaded no higher than the
(Max. Level Indicator).
Slide the Document Guide Plates up against
the edges of the paper stack.
the edges of the paper stack.
Replace the Manual Bypass Tray.
NOTE
The following indicator will appear in the
display after replenishing the paper:
The following indicator will appear in the
display after replenishing the paper:
The copy job is still saved in the machine’s
memory.
Press the Start Key to resume operations.
memory.
Press the Start Key to resume operations.
Paper Tray
1
C4007O115CA
2
C4007O116CA
3
C4007O117CA
C4007O162CA
4
C4007O118CA
5
C4007O119CA
C4007O017CA
The error indicator displayed here will appear
when the paper supply inside of the machine has
been depleted. The machine will not be operable
under these circumstances.
Follow the procedure provided below to replenish
the paper supply when this indicator is displayed.
when the paper supply inside of the machine has
been depleted. The machine will not be operable
under these circumstances.
Follow the procedure provided below to replenish
the paper supply when this indicator is displayed.
C4007O037CA